Jasper Versions
Please contact Cristal Controls technical support before applying an update. You may need to adjust settings on your new software version.
-
2026-11-17
More details
-
Updated curl to version 8.23.0, rsync to version 3.5.2 and the time zone data to version 2026f on OS 24.10 devices.
-
Fixed the time being 1 hour behind since November 1, 2026 on devices in British Columbia, Alberta, Manitoba and the Northwest Territories, which no longer change time. The Jasper Updater applies the new rules to devices already set to these time zones.
-
2026-11-06
More details
-
Added a Shedding order tab to the Load Shedder page, showing the shedding order of the steps and the state of each step.
-
Added an Overridden tag next to the Actual Power value on the Load Shedder page when the power override is enabled.
-
Added help icons on the Load Shedder page showing the BACnet objects used by the override controls.
-
Added the On Power Loss setting to the load shedder configuration, to choose the action when the power reading is lost (Use Minimum Valid or Hold). New load shedders use Hold by default.
-
Added warnings on the Load Shedder page when the load shedder is not running and when the power reading is lost.
-
Added range checks on typed values in the load shedder configuration and on the Load Shedder page, with the allowed range shown in the help.
-
Added a help icon with the allowed range of the Delay field on the Sequencer configuration page, and enforced the same limit as Jasper.
-
Added the full value as a tooltip on the Text and Link fields of the floor plan configuration.
-
Added summary cards to the Load Shedder page and improved its power bar and state badges.
-
Added a confirmation on the Load Shedder page before large setpoint or power limit changes.
-
Added a duplicate card warning on the Browse Cards page.
-
Improved the Load Shedder page with a confirmation before override changes.
-
Improved the reliability of the load shedder. A misconfigured load shedder, an empty group member or an unavailable Hydro-Québec database no longer stops the shedding.
-
Improved the Jasper Updater, which now runs the web update in the background.
-
Updated PHP to version 8.3.36, lighttpd to version 1.4.85 and OpenSSH to version 9.9_p2-r2 on OS 24.10 devices.
-
Fixed the load shedder not using the power override value in the shedding decisions.
-
Fixed several load shedder calculations, including fractional kW for proportional steps, reversed minimum and maximum power scaling, and a negative manual power limit now treated as no limit.
-
Fixed the effective power limit of the load shedder keeping its old value after the manual power limit was set back to 0 or after a Hydro-Québec event ended.
-
Fixed the handling of Hydro-Québec events with several load shedders.
-
Fixed normal-only load groups being turned on at startup in generator mode.
-
Fixed the load shedder setpoint schedules being duplicated each time the load shedder configuration was saved with more than one load shedder.
-
Fixed all web pages becoming unresponsive under a heavy load of dataserver web service requests.
-
Fixed duplicate cards created by the BACnet Dataserver Discovery page when a card lookup failed.
-
Fixed Jasper pausing for about 4 seconds on each XBee setup retry when the XBee port or module is not available.
-
2026-11-03
More details
-
Improved the reliability of the Hydro-Québec synchronization.
-
Fixed the load shedder not receiving Hydro-Québec peak events under certain conditions. The issue became apparent as the list of past events returned by Hydro-Québec grew.
-
2026-10-07
More details
-
Added the option to keep the system log in a persistent file that survives reboots, configurable from the Debug configuration page. This file is also included in the data backup.
-
2026-10-06
More details
-
Added a new value-triggered redirection module that automatically sends a page to a floor plan, URL or screensaver when dataserver variable values match the configured values. Useful for touch screens that must follow the movable wall positions of a room partition.
-
2026-10-01
More details
-
Improved the automatic group value mode so a group reports a fault when a member becomes faulty through its Reliability or Out_Of_Service property, not only when the member value becomes invalid.
-
Improved the floor plan slider control so the handle keeps following the latest value even when the variable is unreliable, while still showing the reliability state.
-
2026-10-01
More details
-
Added an automatic value mode for groups, where the group value reflects the real state of its members (logical OR for boolean members, average for numeric members, otherwise the last command).
-
Improved the floor plan slider controls so the handle no longer flickers to the feedback value right after being moved. The latest feedback value is applied after a delay.
-
Reduced spurious writes from touch sliders when the value did not actually change.
-
2026-09-11
More details
-
Added HTTPS certificate management on OS 24.10 devices, allowing to create, import, export and reset the certificate, and to enable or disable HTTPS.
-
Added SSH server configuration on OS 24.10 devices, allowing to enable or disable SSH and to set the listen port.
-
Added support for the SO-BN-DA-CTRL card model.
-
Added an alarm on BACnet Dataserver network write timeouts.
-
Restricted the restore file selector to zip files on the Backup and Restore page.
-
Improved the Restart button on the Process Status page, which previously could leave Jasper stopped and could make the page hang while restarting.
-
Improved saving the dataserver configuration on the BACnet Dataserver Discovery page to prevent corrupting the configuration when adding a large number of objects.
-
Improved the SO-BN-DA-CTRL card page, displaying the lamp, group and channel values in tables with visible variable names and a channel tabs.
-
Fixed an issue where a new device could initially have a previous Jasper version installed instead of the latest.
-
2026-08-27
More details
-
Added a Sequencer module allowing to execute a sequence of variable writes with configurable delays.
-
Added proprietary property discovery to the BACnet Dataserver Discovery page.
-
Added updating object names from the network to the BACnet Dataserver Discovery page.
-
Added object types, object names, proprietary property names and identifiers, to the search filters on the BACnet Dataserver Discovery page.
-
Added a pre-save change summary dialog on the BACnet Dataserver Discovery page.
-
Fixed the access to the Network Capture page and its menu link on OS 24.10.
-
Fixed the load shedder report and configuration page links for the user menu.
-
2026-08-12
More details
-
Added support for the CC-ONYX room controller device model.
-
Added per-user and per-permission customization of the orange menu in the web interface.
-
Harmonized the system package version numbering to the Major.minor.revision (M.m.r) format.
-
Fixed the build date shown in the version information on OS 24.10 devices.
-
Fixed the Jasper Updater failing to update a device, by now accepting the changed host key.
-
2026-06-29
More details
-
Added Tailscale Remote Access support, enabling secure remote access over the internet.
-
Added a link to the variable configuration page for the destination from the schedule configuration page.
-
Improved sunrise / sunset coordinates entry to accept either a comma or a period as the decimal separator, with validation of latitude and longitude values.
-
Fixed cycle detection in the dependency graph.
-
Fixed empty device and object names on the BACnet Dataserver Discovery page for devices that encode their names as UCS-2; these names are now converted to UTF-8 and displayed correctly.
-
Added the device hostname and the real-time date and time to the web interface header.
-
Harmonized the version numbering to the Major.minor.revision (M.m.r) format.
-
Improved the web interface header with the Cristal and Jasper logos grouped at the left.
-
Fixed a redirect to a raw JSON data page after login, when the session had expired while a page was left open.
-
2026-06-03
More details
-
Added a web based system update web page to allow updating directly from the browser by uploading the new version file.
-
Added a button to duplicate groups in the Groups configuration.
-
Fixed the System Time floor plan control not loading on some device configurations web pages.
-
Fixed WebSocket port configuration applying on unsupported OS versions.
-
Fixed slider controls retaining their resized dimensions when navigating between floor plans.
-
Fixed Light Control configuration page not reading back its saved lamp configurations.
-
2026-05-01
More details
-
Fixed backup archives not preserving directory hierarchy on OS before 24.10.
-
2026-04-23
More details
-
Fixed the System Time floor plan control not loading the configured display format.
-
Fixed a floor plan crash when enumerations were not available for simple buttons.
-
2026-04-09
More details
-
Added a Schedules Summary page showing overview information, enumeration tooltips, quick links to destinations and days, and a search filter.
-
Added a Daily Schedules list page with summary information, direct links to the corresponding scheduler day tab, and a search filter.
-
Added a Scheduler list page displaying all schedules with their effective periods, status, and a search filter.
-
Added an Enumerations page accessible from the site navigation menu.
-
Added a search filter on the Scene Translators page to quickly locate scenes by name.
-
Added a search box on Floor Plan views to locate controls by variable name or label, with matching results highlighted.
-
Added a live graph for real-time monitoring of variable values as they change.
-
Added an interactive Dependency Graph showing relationships between variables, load shedders, scene translators, bindings, alarms, and more.
-
Added a confirmation dialog on the Scene Translators page before executing a scene, with a "Do not ask again" option remembered for 2 hours.
-
Added summary information bars to the Variables Configuration, Cards Browse, Active Alarms, and Floor Plan list pages.
-
Added a member count indicator to each filter group on the Log Filter Configuration page.
-
Improved schedule sorting to use natural, case-insensitive ordering by name (e.g. "Schedule 2" appears before "Schedule 10").
-
Improved enumeration value display in daily schedules by showing the constant name in bold with a subtle type prefix.
-
Added numeric value tooltips to Allowed Command dropdown options.
-
Increased the maximum floor plan image upload size from approximately 1 MB to 5 MB.
-
Improved the File Manager interface for delete operations and section overview.
-
Updated the logger report graph tooltip to show the curve name and color.
-
Fixed the navigation dropdown menu not showing certain items under the System section.
-
Fixed scene translators using incorrect sequential numbering instead of the actual recall value for enumerations.
-
Improved report variables selection in the logger with the help of dual-list.
-
Added URL search parameter support to the scheduler list, enabling direct links to filtered results.
-
Added a description field to the schedule configuration, displayed in the scheduler list.
-
Added a quick link to variable configuration from the BACnet Objects context menu.
-
Added links to variable configuration from floor plan read / write variables.
-
Added a link to variable configuration from the scheduler allowed command variable.
-
Improved search in Variables Configuration with an updated search icon, native clear button, and better selection behavior.
-
Added a summary bar with duplicate name indicators to the Enumerations page.
-
Duplicate enumeration names are now highlighted in the enumeration list.
-
Added a button to clear the DataServer usage cache from the System Status page.
-
Floor plan now loads the floors list when an invalid floor name is specified.
-
Updated the simple button highlight color.
-
Improved System Time configuration by replacing manual date and time text entry with dropdown lists.
-
Added a button in System Time configuration to obtain date and time from the local computer, including a one-click button to fill and automatically save.
-
Added a System Time control to the floor plan, displaying the server current time with configurable format presets (Date+Time, Time, Time without seconds, Date).
-
Added a dashboard to the home page for logged-in users, showing a configuration summary, and quick links to frequently used pages.
-
2026-03-24
More details
-
Improved time configuration on OS 24.10.
-
Improved initialization and reading of the load shedder configuration file.
CC-WiXBee
-
Improved XBee communication with fixes to stability, packet handling, state machines, concurrency, initialization, error recovery, and overall reliability.
-
2026-02-05
More details
-
Fixed user menu showing a blank page and disabled buttons.
-
Fixed BACnet router page display issues.
-
Fixed server error on BACnet router page.
-
Updated system for OS 24.10 compatibility.
-
Added missing translations.
-
Fixed configurable WebSocket port support for user floorplan view full.
-
Added support for new LIP router models: ME201C, ME202C, ME204C.
-
Improved code stability with updated file inclusion.
-
2026-01-26
More details
-
Added support for OS 24.10, including SSH, system reboot, file system, and SMTP configurations.
-
Improved GDP Hydro API error handling and synchronization.
-
Added a test/development mode for GDP Hydro to connect to cristacontrols.com for fake events.
-
Implemented power override functionality in the load shedder for testing and demonstrations.
-
Added a new BACnet Objects tab in the load shedder configuration for internal Jasper variables.
-
Added AV232 dataserver for A/V integration.
-
Introduced new skins for analog and digital buttons.
-
Added support for Jasper Portal on the jasperportal.cristalcontrols.com domain.
-
Improved Internet connection diagnostics and error messages for GDP Hydro.
-
Fixed various bugs in load shedder configuration, including group removal and offer selection.
-
Added warning states before GDP events.
-
2025-11-28
More details
-
The event editing screen now behaves the same as the event creation screen.
-
New tools have been added to help diagnose Internet connection issues in the load shedder.
-
The scheduler configuration page has been redesigned for easier use.
-
A new warning now informs users about Hydro-Québec API usage limits.
-
BACnet loads now display their names instead of their technical addresses on the load shedder web page.
-
The validation message for same-day events has been improved in the load shedder demand response configuration.
-
Security and connectivity checks have been improved for the load shedder demand response.
-
Group management is now more reliable when cards or variables are deleted.
-
Keyboard shortcuts have been added to show or hide polygons on the floorplan.
-
Power units are now displayed in the load shedder.
-
A new Delete All button has been added to the file manager.
-
Floorplan control buttons are now better centered and easier to read.
-
Keyboard editing of polygon opacity and border thickness now works correctly.
-
The load shedder now uses the updated Hydro-Québec API to access demand response offers.
-
2025-10-08
More details
-
Added an auto-generated web page for visualizing and bypassing outputs controlled by a load shedder.
-
Added support for managing demand response in load shedders.
-
Added support for LightControlLamp and SchedulerProperty as binding sources.
-
In the User Configuration menu page, allow reordering of sections and subsections.
-
Removed support for Flash based charts in Trending reports.
-
2025-02-21
More details
-
Added the ability to configure multiple load shedder.
-
Added a power limit to the load shedder.
-
Added the configuration of the displayed power unit for a load shedder.
-
Fixed an issue with 'User Menu' that prevented its use when Jasper was already configured with an orange menu.
-
Fixed the display of simple floor plan buttons without a reading variable.
-
Allows the use of an enumeration value as a highlight value for simple floor plan buttons.
-
Disabled the 'Lighting Statistics' feature.
-
Fixed the reading of variables on the floor plan when 16 consecutive controls are configured without a reading variable.
-
Displays critical errors preventing the startup of Jasper on the 'Process Status' web page.
-
Fixed multiple translation texts.
-
2024-09-06
More details
-
Added a web page to allow capturing the BACnet/IP or other IP communications sent and received by Jasper.
-
Fixed the display of the floor plan on the older Jasper.
-
2024-07-11
More details
-
Fixed an issue introduced in the previous version regarding multiple selection in floor plans.
-
2024-06-26
More details
-
Added a web page to allow the manual deletion of Jasper configuration files and databases.
-
Fixed of the use of the "fast_click" parameters for the floor plans.
-
2024-06-07
More details
-
Fixed of the use of skins for certain floor plan controls.
-
Fixed of the use of floor plans on older touchscreen displays.
-
Fixed of the double-click when adding a single variable in the variable addition dialog on web pages.
-
2024-05-28
More details
-
Add the ability to create a new floor plan based on a predefined template for touchscreens.
-
Fixed an issue with saving configuration on the BACnet Dataserver Discovery web page.
-
Fixed double click when adding a single variable in the Browse Variables web page.
-
2024-05-27
More details
-
Adds settings on the network configuration web page to allow disabling and modifying the port of the network services SSH and FTP.
-
Fixed an issue with using the latest version of the XML library.
-
2024-05-16
More details
-
Adds a new Polygon control for the floor plans.
-
Allows the calculation of the power used by load shedding directly in Jasper.
-
Adds highlight option to the Simple button controls of the floor plans.
-
Allows the configuration of user menu and home page.
-
Adds a new configuration page allowing to hide/show certain web page menus.
-
Allows logging of Schedule / Allowed Command, Alarm / Source and Light Control variables in the trending report.
-
Improves appearance of the Simple button controls of the floor plans.
-
Fixes use of Schedule / Allowed Command on the floor plans.
-
Fixes Paste Special with units for Input Text controls on floor plans.
-
Fixes vertical scrollbar of floor plan list.
CC-WiXBee
-
Support Xbee 3 radio module.
-
2022-12-13
More details
-
Allows to re-order the floor plans.
-
Allows to rename a floor plan from the More menu.
-
Allows to disable and enable a Source alarm from a DataServer variable.
-
2022-06-01
More details
-
Adds support for CCTC-302.
-
Adds support for DALION-4.
-
Adds a button to delete a floor plan from the floor plans list table.
-
Adds more icons for the floor plans.
-
Adds a search field for the selection of icons while editing a floor plan.
-
Adds a button for copying to the clipboard the variable names while editing a floor plan.
-
Adds the skins "Heating", "Cooling" and "Charging Station" for the control "onoff" of the floor plans.
-
Adds the skins "Light Blue Cristal" and "Orange Cristal" for the control "analogic" of the floor plans.
-
Modifies the default floorplan image resolution for 1024 x 600.
-
Adds the possibility to add or remove from the dataserver all the proprietary properties of the card CCLDIM.
-
Fixes several issues and improves the page "Add cards to the DataServer".
-
Fixes issues with BACnet properties when saving a card with the page "BACnet Dataserver Discovery".
-
Fixes the sorting of the table columns on the page "Browse Cards".
-
2021-07-19
More details
-
The mode Standard / Fade of the schedules can be configured by a variable of the DataServer.
-
Improves the calculation of the "LightControl" fade.
-
Fixes a problem where when the "Interval (m)" field is empty Jasper sends BACnet Time Synchs much too quickly.
-
Creation of BMT-DI4 and BMT-DI10 controllers in "Adding card for pre-production".
-
When deleting a floor plan, add a check that the floor plan image is not used in another floor plan before deleting it.
-
In the page "Adding card for pre-production" allows modifying a card already present.
-
2020-06-12
More details
-
Allows to save the schedules with the keyboard shortcut CTRL + S.
-
In the "Packages / Update" page no longer checks for updates on the internet when the page opens. A button allows verification on the internet.
-
At the start of Jasper the value of "LightControl" is determined according to the network values.
-
Adds of a feedback variable to the "LightControl".
-
Allow to modify the value of the schedule destination when changing the allowed command.
-
Improves the stability of "LightControl".
-
Correction of problems in the visualization pages of the cards since the addition of "LightControl".
-
Correction of problems in the "BACnet Discovery" page for devices with objects of type "Group".
-
On the floor plans corrects the reading of the variables with color controls.
-
In the "Browse Cards" page, corrects an issue where after doing a search you had to double-click on a card to open it.
-
Correction of problems when adding and modifying CCSW-BN cards.
-
2019-08-28
More details
-
Allows to modify the commands allowed from the schedule configuration pages.
-
Adds of a search field by name in the page "BACnet Dataserver Discovery".
-
2019-08-21
More details
-
Schedule editing with calendar view.
-
Allows to disabling and enabling schedules using variables. It can also disable only the On events or the Off events.
-
Fade schedule for the circadian cycle (intensity, color).
-
Adds LightControl. It allows the use of lights with adjustable whites (tunable white).
-
Adds an "address" to enumerations, this allows to rename them without losing the links in the other modules.
-
The Scene Translator configuration creates an enumeration. This simplifies the use of scene by other modules, like the schedules.
-
Allows the Translators to use NULL as its output.
-
On the floor plan, adds a dimming button for tunable white lights.
-
Enables the creation of the KC-601.
-
Fixes a problem that causes Jasper to stop when a "Stage" of a "Stage Repeat" is empty in the load shedder.
-
2018-04-10
More details
-
Added support for version 3 of the CCLP-DMX.
-
Make it impossible to add the same card twice through the web interface.
-
Improves the display of MAC addresses in the BACnet address cache page.
-
Added a simple page for logging in from a touch screen.
-
Corrects WebSocket to work when the page is accessed by an HTTP port other than 80.
-
No longer allows system files to be restored unless explicitly requested.
-
No longer allows restoration of system files if the operating system version is not compatible.
-
When adding an event to a schedule, automatically selects the time field.
-
Causes the source name of the emails to use the network name of the machine (hostname) instead of always root.
-
Corrects the use of "\n" to make a new line in floor plans on new Jasper.
-
Added "Tunable White" appearance for "Slider" type controls.
-
No longer responds with an I-Am when receiving a Who-Is for Device ID 4194303.
-
Scene Translators keeps empty lines.
-
Adds the ability to change the size of controls of different types by the web interface.
CC-WiXBee
-
Improved stability when communication with the radio is temporarily lost.
-
Disable the use of direct communication with REL-RTMXB.
-
2024-05-16
More details
-
Adds a new Polygon control for the floor plans.
-
Allows the calculation of the power used by load shedding directly in Jasper.
-
Adds highlight option to the Simple button controls of the floor plans.
-
Allows the configuration of user menu and home page.
-
Adds a new configuration page allowing to hide/show certain web page menus.
-
Allows logging of Schedule / Allowed Command, Alarm / Source and Light Control variables in the trending report.
-
Improves appearance of the Simple button controls of the floor plans.
-
Fixes use of Schedule / Allowed Command on the floor plans.
-
Fixes Paste Special with units for Input Text controls on floor plans.
-
Fixes vertical scrollbar of floor plan list.
CC-WiXBee
-
Support Xbee 3 radio module.
-
2017-04-25
More details
-
Added an RGB control to floor plans.
-
Added a web page for "Cards Statistics".
-
Replaced the two calendar lists with one active calendar list with + / - buttons.
-
The DataServer can now change the priority setting of BACnet objects.
-
Fixed the "Set Value ..." button on the group configuration page.
-
Ensures IP addresses are valid before saving the system_network_config.php page.
-
Added "Restart Notifications" BACnet messages to alarms.
-
Fixed file system checks of /home/ftp and prevented disconnection of disks.
-
Enabled creation of the new CCLDIM controller.
-
Added the DALI bus status for the L-DALI.
-
Can now copy names from relay panels to the XLSX panel schedule.
-
Made all Jasper web pages printer-friendly.
-
Added a "yellow light" skin for digital, analog, and input text controls on floor plans.
-
Added an "occupancy man" skin for on/off controls on floor plans.
CC-WiXBee
-
Added a wireless packet monitor.
-
Enabled transmission of user-generated wireless messages directly from a web page.
-
Enabled opening of a "connection" for each 64-bit MAC address, to send unicast messages to just one device instead of broadcast messages to all devices.
-
Added "network hops" to the "xbeedoo_config.php" page.
-
Now tries to reset the XBee module automatically when communication with the module is lost.
-
Fixed issues in the XBee communication library.
-
2016-09-21
More details
-
Responsive web design added.
-
Menus reorganized.
-
Included update.xml file in the usage section of variables_config.php.
-
In the Variables Browse interface, when the time of a variable is not initialized (0) it now appears as "0000-00-00 00:00:00" instead of 1970-... .
-
Now generates a software alarm when Jasper detects a significant system time change.
-
Fixed issue caused by modifying system time.
-
Displays unoccupied setpoint when the thermostat is in unoccupied mode.
-
Added ability to duplicate layout and configuration of a floor plan control to other controls.
-
Added ability to copy text from individual elements in lists.
-
Added a contextual menu on the variables list to enable both: opening of a variable's configuration dialog, or; changing its value directly.
-
Fixed calendar issues caused when reading the scheduler.xml configuration file.
CC-WiXBee
-
Added a spectrum analyzer for wireless frequencies.
-
Set the Xbee module to AP mode 1 on startup.
-
Added a display page for REL-RTMXB.
-
Added a page showing wireless @info.
-
2016-05-13
More details
-
Several minor corrections made to the "single page" mode of floor plans.
-
Fixed an issue in floor plans where "Undo / Redo" required multiple mouse clicks.
-
2016-04-11
More details
-
Enabled discovery of BACnet devices on the network and addition of devices to the data server.
-
Added "undo" and "redo" buttons to floor plan editing interface.
-
Enabled switching to another floor plan without completely reloading the web page, thus speeding up transitions between plans.
-
Enabled copying of controls between floor plans.
-
Modified tool button positioning in the floor plan editing interface.
-
Jasper now shows notifications in the browser when an alarm is received.
-
Displays the number of active alarms in the website header.
-
When upgrading Jasper, avoid enabling and start if Jasper was disabled prior to upgrade. The new installer handles these steps as required.
-
BACnet time synchronization can be disabled.
-
Fixed parsing of BACnet UnconfirmedCOVNotification Device Restart Procedure.
-
Fixed properties encoded in BACnet message UnconfirmedCOVNotification - Device Restart Procedure.
-
Added support for the BACnet service ReadPropertyMultiple-B.
-
The BACnet stack now verifies available space before encoding its messages, which enables return of larger responses.
-
Upgraded BACnet stack to 0.9.0.
-
Fixed COV subscription interval calculation.
-
Fixed issue where user session files were not properly closed. This issue could prevent browser connections to the system.
-
Fixed issue where using internal multi-state BACnet objets could corrupt Jasper's memory.
CC-WiXBee
-
Added a web page to import wireless devices from their XML configuration file.
-
Statistics from wireless radio are available again from the system.
-
2015-12-18
More details
-
Floor plan editing improvements.
-
Enabled floor plan duplication.
-
Improved auto alignment of controls on floor plans.
-
Floor plan controls of the following types are now skinnable: onoff, digital, analogic, simple, link, inputtext, slider.
-
Enabled copying of controls on a floor plan.
-
Added a right-click menu for floor plans to make various features more accessible.
-
Enabled download of logs and alarm databases.
-
Added read support for the BACnet Accumulator object type.
-
The Browse Variables page now indicates whether the value of a variable has been read with COV or polling.
-
2015-10-19
More details
-
Added "on / off" button type to floor plans.
-
Enabled modification of appearance of "digital" and "on / off" buttons on floor plans.
-
Improved performance of slider button on floor plans when used on a touch screen.
-
Added ability to manually archive alarms.
-
Improved write speed on BACnet MS/TP networks, allowing more than one write request in the BACnet TSM.
-
Added option to bindings so that they do not propagate initial reading on the network.
-
Added a search field to the variables browse page.
-
The size of the BACnet address cache adapts automatically according to the number of cards presents in the DataServer configuration.
-
Added "Scene Translators", enables writing of different values to multiple variables. Accessible via scenetranslators.php or Jasper - Variables - Scene Translators.
-
2015-05-25
More details
-
Added "fast_click" for slider buttons on floor plans.
Touch Screen
-
First Jasper version for touch screens.
-
2015-05-15
More details
-
Improved WebSocket communications.
-
Improved displayed results after "Check file system."
-
Now uses polling if COV subscription returns an error.
-
Added BACnet objects from load shedder to variable usage list.
-
If an event is between 2h00AM and 3h00AM when daylight saving time occurs, the event is executed at 3h00AM.
-
Displays sunrise/sunset events in the "Exceptions" tab of Schedule configuration interface.
-
Button added to clear events from a weekday in the "Schedules" tab of the Schedule configuration interface.
-
Enabled addition of any BACnet property to the DataServer (with a Jasper supported data type).
-
Fixed several issues and improved display performance.
CC-WiXBee
-
Now enables serial number changes when replacing a wireless relay.
-
Now enables setting of radio channel.
-
Now enables setting of radio encryption key.
-
Added support for new command SAVE_CURRENT_LEVEL_SETPOINT for wireless relay scene programming.
-
Enabled wireless relay metering read and write.
-
Fixed number of write command attempts to a relay when there is no response.
-
2015-03-30
More details
-
Improved WebSocket communications.
-
Added ability to view open WebSocket connections.
-
Now caches thermostats information locally to speed up page loading.
-
Added ability to create CCLD4002 controllers.
-
Now displays members count for a selected group in the group configuration page.
-
Now enables launching BACnet server even if BACnet network has no controller defined.
-
2015-01-27
More details
-
Now displays static DHCP leases in the DHCP configuration page.
-
Improved internal management of active alarms.
-
Configured cards are held longer in the BACnet address cache.
-
New internal BACnet object types added: Multi-State-Value, Multi-State-Input and Multi-State-Output.
-
Fixed a display issue on thermostats pages (issue introduced in the previous version).
-
Added support for BACnet COV-B.
-
Added Reinitialize Device BACnet service.
-
Added support for BACnet backup and restoration.
-
Can now edit CCLP-1664 cards from the DataServer configuration.
-
Improved device editing for large projects.
-
Limit to number of alarms displayed in the alarm history page.
-
Enabled grid alignment for controls on a floor plan.
-
Added a DataServer address for internal BACnet objects, now independent from the object name.
-
Added a DataServer address for groups, now independent from the group name.
-
New button enables opening floor plans from within an open floor plan.
-
Code improvements for large configuration files.
-
Web browser compatibility fixes.
-
Groups can be renamed without losing their link with other Jasper functions. (Due to this change, Jasper's configuration can no longer be exported to older Jasper versions.
-
Enabled creation of new CCLD-4002 controller.
-
Enabled creation of new CC-DMX2BACNET controller.
-
Jasper can read values in files on its own storage instead of from a controller.
-
Added a new slider control into floor plans.
-
Digital buttons have a newer round style.
-
Added keyboard shortcuts to floor plan creation interface.
-
Many value updates now done using WebSockets protocol to reduce CPU load.
-
2014-03-25
More details
-
Fixed display of small popup calendar.
-
User actions are recorded in the syslog server.
-
Users may be banned after entering several invalid passwords.
-
Fixed calendar issue when using a date range across several years.
-
Added a floor plan button to send commands. Appearance of button does not change to reflect state of controllers.
-
Added fixed text strings on floor plans.
-
Floor plans controls can be resized.
-
Card list now presented in a sortable table.
-
Added new options for creating LS-Pulse v2.3.0 with COV.
-
Added a new user-level that can send network commands without the ability to change settings.
-
2014-01-14
More details
-
Improved web page caching.
-
Improved loading time for the scheduler web page.
-
Improved memory usage while parsing large configuration files.
-
Enabled NULL value in schedule events.
-
Added visualization of DALI groups and channels.
-
Now displays configurations found in variables_config.php (Jasper - Variables - Configuration) in groups according to their relationships with Jasper functions.
-
Added support for UnconfirmedCOVNotification BACnet service.
-
Improved BACnet COV subscription.
-
Added ability to configure DALI device settings.
-
Added personal lighting area display when Jasper used on mobile devices.
-
2013-12-01
More details
-
A lot of releases not exposed to public.
-
2013-05-02
More details
-
Enhanced HTML5 graph reports. Multiple selection is now possible. Better zoom rendering.
-
Can now select values to be included in the "Event" report.
-
Load-Shedder graph report now uses the HTML5 engine.
-
Better effective date checking for schedules.
-
Database configuration path replaced by a check box.
-
Added ability to create CC-DIMR controller.
-
Better LoadShedder.xml configuration file handling. Avoids infinite loops and unforeseen configurations.
-
Improved cache control for Internet Explorer.
-
Bug fix when creating different load-shedding setpoints for each month.
-
New load-shedding algorithm for use with generators.
-
Prevent unused schedules from being lost while saving load-shedding configuration.
-
2013-02-18
More details
-
New setting allows step-by-step shedding instead of using power calculation.
-
Menu improvements for touchscreen devices.
-
Added HTML5 graphical report for devices not supporting Flash.
-
BACnet protocol improvements.
-
2013-02-01
More details
-
Fixed an issue affecting thermostat display.
-
Enabled use of BACnet proprietary properties.
-
Jasper now responds to Who-Is/Who-Has BACnet service requests with I-Am/I-Have on the source network only.
-
Fixed several issues and improved display performance.
-
lighttpd web server updated to 1.4.32 and configuration changed for certain audio files.
-
2012-11-16
More details
-
Modified interface theme.
-
Enabled automatic user login from specified IP addresses.
-
Added ability to view list of users currently signed in to Jasper.
-
Added ability to view thermostats on floor plans.
-
Added configuration for OpenVPN outgoing connection (client).
-
Added WattNode configuration and viewing.
-
Polling intervals for power now changed automatically to follow load-shedding configuration.
-
Added virtual keyboard for touch-screen PCs.
-
Audible alert sounds when a new alarm is received.
-
Fixed an issue in the calendar for load-shedding setpoints where some values were left blank.
-
Updated CCTHV-407 template for the new 0-10V temperature input.
-
Fixed a configuration issue with the load value of a "proportional" group in load-shedding configuration.
-
Added a module for a TS-BAT10 battery backup.
-
Added maximum and minimum comfort setpoints for CCTHV-407.
-
2012-08-28
More details
-
2012-06-27
More details
-
Fixed an issue with calculation of lamp "on time" when the lamp is included on more than one floor plan.
-
2012-06-20
More details
-
Added lighting statistics to record how long lamps configured on a floor plan are switched on.
-
Added support for BACnet Device Restart Procedure.
-
Load Shedding algorithm continues execution when power reading on the network fails.
-
"Reliability" or "Out_Of_Service" status now indicated on floors plans.
-
Added ability to generate alarms from groups.
-
Added ability to view CCLD-1001 cards.
-
Enabled periodic connection to Jasper-Portal. The portal can send e-mail when Jasper's Internet connection is lost.
-
Corrected the time calculated and displayed for sunrise/sunset events in schedule configuration to match time used for schedules.
-
Fixed issue with addition of alarms when the database is busy.
-
Time of last synchronization done by SQLManager is now saved in the MySQL database.
-
Fixed an issue where time transferred by SQLManager for an event had no time zone.
-
Generates software alarms from the message «BACnet Reject Handler».
-
Generates software alarms if an IP communication port cannot be opened.
-
Fixed several issues and improved display performance.
-
2012-03-30
More details
-
Fixed an issue with alarms that, upon being resolved, are not deleted from list of active alarms.
-
Fixed issues affecting detection and reporting of offline cards/variables.
-
Fixed an issue where daylight savings time updates from the real-time clock (RTC) could be lost during power outages. To apply this fix, adjust the time clock.
-
Added support for LDALI-ME204 version 2.X.
-
Enabled configuration of DALI scenes using an LDALI-ME204.
-
Enabled configuration of 12 monthly power setpoints.
-
Added ability to generate alarms based on variables read from networks and internal BACnet objects.
-
Added ability to enable/disable the password/user of the web server.
-
Added ability to display the interface in full screen aligned to the left.
-
Fixed several issues and improved display performance.
-
2011-12-19
More details
-
Added alarm features.
-
Added alarm configuration settings.
-
Added Load Shedder configuration settings.
-
Added floor plan configuration settings.
-
Added ability to create multiple user accounts.
-
Fixed several issues and improved display performance.
-
"ntpclient" updated to reduce disk writes. After applying this update, you need to reprogram Internet time synchronization.
-
Speed improvement for database requests. "adodb" package no longer required.
-
2011-09-08
More details
-
Added alarm system. Alarm status recorded in a database can be transmitted via e-mail, pager or a DataServer variable.
-
Added configuration of custom reading intervals for each DataServer variable.
-
Improved retransmission behavior of LoadShedder load values. Can be configured in the new Update module, Jasper - Variables - Variables Updates.
-
Added ability to rename controllers.
-
Fixed several issues and improved display performance.
-
2011-06-08
More details
-
Added ability to obtain network statistics.
-
Added ability to display configured thermostats from the thermostats.php page.
-
Fixed several issues and improved display performance.
-
2011-05-04
More details
-
Added ability to delete a variable and all its associated data from the log.
-
Added ability to perform a file system check of the mounted partitions.
-
Added easily accessible button to perform safe system shutdown.
-
Fixed several issues and improved display performance.
-
2011-03-29
More details
-
Added value translators.
-
Added translator configuration.
-
Added binding configuration.
-
Now displays floor plan buttons in a table.
-
Added LS-Slave card visualization.
-
Fixed several issues and improved display performance.
-
2011-02-11
More details
-
Added generic visualization interface for system variables.
-
Enabled deletion of DataServer controllers.
-
From the "Thermostats" page, clicking the moon or sun icons redirects the user to the corresponding scheduler.
-
If a Boolean BACnet value is sent to an analog object, Jasper converts 1 to 100 and keeps 0 as 0.
-
Ability to back up configurations on a 2nd embedded PC.
-
Ability to create text labels to represent number combinations in the schedules.
-
Fixed several bugs and improved display performance.
-
2010-11-11
More details
-
Jasper's interface is now bilingual (English/French).
-
Lighting floor plans are now auto-generated. Jasper extracts the names of relays from the DataServer configuration.
-
After a period without communication between Jasper and a device, buttons on the floor plans change state to indicate a problem.
-
After a period without communication between Jasper and a device, an icon appears in thermostat tables.
-
Added ability to send a backup of the configuration file by email.
-
Several pages modified to allow for inclusion in a customized interface. (For example, schedulers).
-
Can add controllers from the card_templates.php (Jasper - Cards - Add).
-
The "Browse" menu displays known controllers like CCTHV-407 thermostats or lighting panels.
-
In the scheduler, unused typical days are saved for later use.
-
A yellow or red icon appears at the top right of the interface when a restart is required.
-
2010-10-19
More details
-
Now maintains BACnet address cache when Jasper is restarted.
-
Allows reading of multiple variables simultaneously.
-
DataServer variables are now read one at a time instead of all at the same time.
-
Prevents reading of a DataServer variable currently being (or about to be) written to.
-
Added the PROPORTIONAL type for Load Shedder.
-
Added sunrise and sunset events for the scheduler.
-
2010-08-24
More details
-
Added BACnet service Change Of Value (COV) to obtain value changes from the network instead of polling the network for changes.
-
Enabled reading and writing of BACnet multi-state objects.
-
Enabled logging of Fluke Data Logger data.
-
Added display of Jasper's BACnet address cache.
-
Added support for exception days.
-
Added calendar configuration.
-
Added thermostat configuration (CCTHV407).
-
2010-06-14
More details
-
Upgraded BACnet stack to 0.5.4.
-
BACnet writing priority configurable in dataserver.xml.
-
2010-03-03
More details
-
Added logging of BACnet objects.
-
Enabled filtering of values written to the log.
-
LoadShedder: improved command management when setpoint overflow is detected. At DelayOff, Jasper calculates loads to reduce (same for DelayOn).
-
Added configuration of log filter.
-
2009-12-07
More details
-
Added tags to define both initial value and priority of initial value for objects configured in bacnetobjects.xml.
-
2009-11-13
More details
-
Upgraded BACnet stack to 0.5.1.
-
Fixed issues with bacnetobjects.xml file parsing.
-
2009-05-26
More details
|