Jasper Version 2.16.0
Please contact Cristal Controls technical support before applying an update.
You may need to adjust settings on your new software version. Key improvements released in Jasper 2.16.0Added a Shedding order tab to the Load Shedder page, showing the shedding order of the steps and the state of each stepAdded an Overridden tag next to the Actual Power value on the Load Shedder page when the power override is enabledAdded help icons on the Load Shedder page showing the BACnet objects used by the override controlsAdded the On Power Loss setting to the load shedder configuration, to choose the action when the power reading is lost (Use Minimum Valid or Hold). New load shedders use Hold by defaultAdded warnings on the Load Shedder page when the load shedder is not running and when the power reading is lostAdded range checks on typed values in the load shedder configuration and on the Load Shedder page, with the allowed range shown in the helpAdded a help icon with the allowed range of the Delay field on the Sequencer configuration page, and enforced the same limit as JasperAdded the full value as a tooltip on the Text and Link fields of the floor plan configurationAdded summary cards to the Load Shedder page and improved its power bar and state badgesAdded a confirmation on the Load Shedder page before large setpoint or power limit changesAdded a duplicate card warning on the Browse Cards pageImproved the Load Shedder page with a confirmation before override changesImproved the reliability of the load shedder. A misconfigured load shedder, an empty group member or an unavailable Hydro-Québec database no longer stops the sheddingImproved the Jasper Updater, which now runs the web update in the backgroundUpdated PHP to version 8.3.36, lighttpd to version 1.4.85 and OpenSSH to version 9.9_p2-r2 on OS 24.10 devicesFixed the load shedder not using the power override value in the shedding decisionsFixed several load shedder calculations, including fractional kW for proportional steps, reversed minimum and maximum power scaling, and a negative manual power limit now treated as no limitFixed the effective power limit of the load shedder keeping its old value after the manual power limit was set back to 0 or after a Hydro-Québec event endedFixed the handling of Hydro-Québec events with several load sheddersFixed normal-only load groups being turned on at startup in generator modeFixed the load shedder setpoint schedules being duplicated each time the load shedder configuration was saved with more than one load shedderFixed all web pages becoming unresponsive under a heavy load of dataserver web service requestsFixed duplicate cards created by the BACnet Dataserver Discovery page when a card lookup failedFixed Jasper pausing for about 4 seconds on each XBee setup retry when the XBee port or module is not available |